OUR BLOG

Our Published Article

How Dynamic Scoring May Impact Tax Return

By Charles R. Goulding and Jennifer Pariante

Charles R. Goulding and Jennifer Pariante discuss how the integration of dynamic scoring can be used to help policy makers and legislators determine the overall economic impact of tax provisions during the furthering tax reform debate

With the Republican controlled Congress, there is increased interest in utilizing dynamic scoring concepts when implementing longer term policies pursuant to major tax reform.  There is a uniform consensus that the current tax system is overly complex and subject to the vagaries of special interest groups rather than serving the countries major policy goals.  Dynamic scoring is a tool that can be used to help policy makers and legislators determine the overall economic impact of a particular tax provision.  The results can be used to rate or compare the overall economic impact of a specific tax provision as compared to an alternative tax provision.  Tax provisions with very high dynamic score ratings actually cost the country less (or even be tax revenue positive) and may enable the enactment of more important tax incentives. Although there are important national policy goals that are unrelated to tax, tax considerations are economic decision making criteria so tax provisions in particular should be subject to dynamic scoring. 

Technical Definition of Dynamic Scoring

Dynamic scoring predicts the impact of fiscal policy changes by forecasting the effects of economic agents’ reactions to incentives created by policy. It is an adaptation of static scoring, the traditional method for analyzing policy changes.

The method gives way to a more accurate prediction of a policy’s impact on a country’s fiscal balance and economic output, when feasible. The potential for heightened accuracy occurs from recognizing that households and firms will change their behavior to continue maximizing welfare (households) or profits (firms) under the new policy. Dynamic scoring is more accurate than static scoring when the econometric model correctly captures how households and firms will react to a policy change.

Leading Policy Makers & Dynamic Scoring

Rep. Paul Ryan (R-Wis.) stated that he would push to make sure that the two congressional budget scorekeepers use the accounting method of dynamic scoring when evaluating GOP tax reform legislation. Sen. Orrin Hatch (R-Utah), who will chair the Senate finance committee starting in January, responded that he was open to implementing the change. Ryan and Hatch can implement dynamic scoring by directing the two budget scorekeepers to accept this budgeting method. Congress could require the Congressional Budget Office and Joint Committee on Taxation to use assumptions about how tax cuts affect the economy. Examples of such assumptions include how they can see how tax cuts influence people’s motivation to work, the moves of the Federal Reserve, and household and business decisions on savings and investment. Budget analysts then can plug said assumptions into several models to estimate economic growth.

Automation’s Impact on Future Jobs    
The IFR affirms that increased automation will have positive impacts on labor demand. In fact, the warehouse robots “take over dull, repetitive tasks, and free up people to perform more value added work.”[i] Automation creates a chain effect in which one activity leads to the next.

Dynamic Scoring Constraints 

One of the main criticisms of dynamic scoring is that the determination and calculation of the economic impacts may be very difficult and also subjective.   Although this is a well founded criticism today’s predictive analytics and software are making this process more quantifiable and understandable.

Conclusion

Prospective debate on integrating dynamic scoring with tax reform should prove interesting. Before reacting with traditional criticism opponents may want to evaluate the improving science of predictive analysis.

Charles R. Goulding, Attorney/CPA, is the President of R&D Tax Saver, an interdisciplinary tax and engineering firm that specializes in R&D tax credits.

Jennifer Pariante is a Project Coordinator with R&D Tax Savers.

Related Articles​

Our Article

Our Published Article

How Dynamic Scoring May Impact Tax Return

March 2024

By Charles R. Goulding and Jennifer Pariante ​

The proposed extension of the very successful Section 179D building energy tax incentive would, for the first time, cover houses of worship facilities and all other not-for-profit facilities. If enacted, the new law would be effective January 1, 2014.

The proposed extension of the very successful Section 179D building energy tax incentive would, for the first time, cover houses of worship facilities and all other not-for-profit facilities. If enacted, the new law would be effective January 1, 2014.

The current 179D legislation, which has been in effect for 8 years, has assisted tens of thousands of commercial buildings and government buildings in upgrading to today’s extremely energy efficient lighting and HVAC products. The government building incentive is provided in the form of a tax incentive for the design/retrofit team that accomplishes the qualifying energy retrofit. Worship facilities were not included in the original legislation

The Proposed EPAct Section 179D Tax Opportunity Under the proposed extension of Code Sec. 179D, design teams working on worship facilities who make qualifying energy-reducing investments would obtain immediate tax deductions of up to $3.00 per square foot. If the building project doesn’t qualify for the maximum of $3.00 per square foot immediate tax deduction, there are tax deductions of up to $1.00 per square foot for each of the three major building subsystems: Lighting, HVAC and the Building Envelope. The building envelope covers every part of the building’s exterior perimeter that touches the outside world including roof, walls, insulation, doors, windows and foundation. The tax incentive would benefit all dominations of houses of worship’s both big and small. Average U.S. House of Worship Designer Tax Benefit Illustration Open Table *Based on an average of 17,000 square feet per worship facility. Large Worship Facility Tax Incentive Illustration Open Table Worship facilities have challenging human usage patterns where it is crucial to upgrade to today’s products to greatly reduce operating costs. LED Lighting Prior generation lighting systems that operate seven days a week are extremely expensive. An LED lighting system with occupancy sensors that only turn the lights on when humans enter the worship facility can reduce lighting related energy costs to a fraction of current costs. HVAC The primary HVAC concern in Worship facilities is the maintenance of occupant comfort with a high variability in occupancy. Technologies that have the ability to lower energy use with lower occupancy are critical in saving energy. Equipment with multiple compressor stages and great part load efficiency represents the first level of increasing energy efficiency. Demand Control Ventilation which modulates air flow based on the presence of Carbon Dioxide in the air, have the ability to greatly improve energy efficiency. Lastly, an economizer using outside air instead of mechanically cooled air during the fall and spring can dramatically increase energy efficiency. Depending on location, worship facilities should layer these technologies to maximize energy savings. Conclusion The worship facility community has an opportunity to greatly reduce energy related operating costs if the proposed law is enacted. Those readers who agree that houses of worship deserve the same tax incentives as other facilities should let their congressman know how they feel.

The proposed extension of the very successful Section 179D building energy tax incentive would, for the first time, cover houses of worship facilities and all other not-for-profit facilities. If enacted, the new law would be effective January 1, 2014. The proposed extension of the very successful Section 179D building energy tax incentive would, for the first time, cover houses of worship facilities and all other not-for-profit facilities. If enacted, the new law would be effective January 1, 2014.

The proposed extension of the very successful Section 179D building energy tax incentive would, for the first time, cover houses of worship facilities and all other not-for-profit facilities. If enacted, the new law would be effective J

 

The proposed extension of the very successful Section 179D building energy tax incentive would, for the first time, cover houses of worship facilities and all other not-for-profit facilities. If enacted, the new law would be effective January 1, 2014.

The current 179D legislation, which has been in effect for 8 years, has assisted tens of thousands of commercial buildings and government buildings in upgrading to today’s extremely energy efficient lighting and HVAC products. The government building incentive is provided in the form of a tax incentive for the design/retrofit team that accomplishes the qualifying energy retrofit. Worship facilities were not included in the original legislation

The Proposed EPAct Section 179D Tax Opportunity Under the proposed extension of Code Sec. 179D, design teams working on worship facilities who make qualifying energy-reducing investments would obtain immediate tax deductions of up to $3.00 per square foot. If the building project doesn’t qualify for the maximum of $3.00 per square foot immediate tax deduction, there are tax deductions of up to $1.00 per square foot for each of the three major building subsystems: Lighting, HVAC and the Building Envelope. The building envelope covers every part of the building’s exterior perimeter that touches the outside world including roof, walls, insulation, doors, windows and foundation. The tax incentive would benefit all dominations of houses of worship’s both big and small. Average U.S. House of Worship Designer Tax Benefit Illustration Open Table *Based on an average of 17,000 square feet per worship facility. Large Worship Facility Tax Incentive Illustration Open Table Worship facilities have challenging human usage patterns where it is crucial to upgrade to today’s products to greatly reduce operating costs. LED Lighting Prior generation lighting systems that operate seven days a week are extremely expensive. An LED lighting system with occupancy sensors that only turn the lights on when humans enter the worship facility can reduce lighting related energy costs to a fraction of current costs. HVAC The primary HVAC concern in Worship facilities is the maintenance of occupant comfort with a high variability in occupancy. Technologies that have the ability to lower energy use with lower occupancy are critical in saving energy. Equipment with multiple compressor stages and great part load efficiency represents the first level of increasing energy efficiency. Demand Control Ventilation which modulates air flow based on the presence of Carbon Dioxide in the air, have the ability to greatly improve energy efficiency. Lastly, an economizer using outside air instead of mechanically cooled air during the fall and spring can dramatically increase energy efficiency. Depending on location, worship facilities should layer these technologies to maximize energy savings. Conclusion The worship facility community has an opportunity to greatly reduce energy related operating costs if the proposed law is enacted. Those readers who agree that houses of worship deserve the same tax incentives as other facilities should let their congressman know how they feel.

Table Header
Table HeaderTable HeaderTable HeaderTable HeaderTable Header
Table DataTable DataTable DataTable DataTable Data

Please click on the link to view the pdf

Published Article

Conclusion

Recent developments in robotics have enabled widespread adoption of robots in warehouses and distribution centers. These robots are intended to work alongside existing warehouse workers to handle tedious, time-consuming tasks that often deter people from seeking out these types of jobs in the first place. This warehouse and distribution center automation creates new avenues for improved productivity and efficiency. 

New Jersey distribution centers handle tremendous volumes and can benefit greatly from automation which offers opportunities to remain competitive and increase efficiencies.  These automation integrations require companies to keep up with the constant revolutionizing of e-commerce.  In addition, as consumer demand constantly changes, businesses must predict the future of the digital economy to maintain a competitive edge.

Companies engaging in the development and integration of warehouse and distribution center automation are eligible for Federal and State R&D Tax Credits to help support and stimulate these efforts.

  1. Inbound logistics. Warehouse automation: The next generation. January 27, 2016. Available at: http://www.inboundlogistics.com/cms/article/warehouse-automation-the-next-generation/
  2. Global Cold Chain Alliance. Warehouse Automation Trends. Available at: https://www.gccaonline.com/eweb/documents/Warehouse-Automation-Trends.pdf
  3. Robohub. Meet the drone that already delivers your packages, Kiva robot teardown. February 1, 2016. Available at: http://robohub.org/meet-the-drone-that-already-delivers-your-packages-kiva-robot-teardown/
  4. Business Insider. Amazon’s $775 million deal for robotics company Kiva is starting to look really smart. June 15, 2016. Available at: http://www.businessinsider.com/kiva-robots-save-money-for-amazon-2016-6
  5. Inbound logistics. Warehouse automation: The next generation. January 27, 2016. Available at: http://www.inboundlogistics.com/cms/article/warehouse-automation-the-next-generation/
Tags

Related Articles

No Content Available