OUR BLOG

Our Published Article

Providing Joint Employer Tax Planning Advice

By Charles R. Goulding and Michael Wilshere

Charles R. Goulding and Michael Wilshere provide tax planning advice for employers in light of the recent National Labor Relations Board decision.

On August 27, 2015, the National Labor Relations Board (NLRB) handed down a landmark decision that could have real consequences for subcontractors and potentially franchises and industries that are engaged in joint businesses.  The decision, which was the product of a 3-2 vote involving sanitation workers, revised the “joint employer” standard for determining when one company shares legal responsibility for employees hired by another. 

The case involved whether Silicon Valley recycling plant, Browning-Ferris Industries, should legally be considered the employer of workers supplied by sub-contractor, Leadpoint Business Services.  Browning-Ferris paid Leadpoint to sort recycling materials.  Leadpoint employees separated paper from plastic and glass on conveyor belts which were owned by Browning-Ferris and run by Browning-Ferris employees.  Leadpoint determined its workers’ salaries and decided whom they should hire, fire, and promote, or demote.  Browning-Ferris simply decided what hours they would run their plant and which lines they would run each day.  On one occasion, Browning-Ferris caught a Leadpoint employee drinking whiskey on the job and asked for his termination.  The NLRB decided that this constituted enough “indirect” control to legally classify Browning-Ferris as a co-employer of Leadpoint’s workers, meaning Browning-Ferris would be liable for overtime pay, taxes, and benefits whenever they are mandated for employees.

Before the decision, one business couldn’t be held liable for employment-related matters at another unless they had direct control over the employees in question.  The new “joint employer” test, however, means that the NLRB could hold businesses responsible for employment policies even if they only exercise indirect control over such employees.  That means employers may be responsible for workers’ rights even if they don’t contract directly with them.  This could have big implications for franchise restaurants and companies who use staffing firms as a labor source.  These staffing firms help the economy run more efficiently by allowing companies to focus on their core specialties while delegating tangential services to sub-contractors.  If the ruling stands however, both entities will become co-employers of the contract workers.  That means an additional level of oversight by the end-user company along with a basket of added complexities could become commonplace in each contracting arrangement.

Now, a union representing workers will be legally entitled to bargain with not only the sub-contractor but also the end-user of the labor.   Attorney Marshall B. Babson who helped write a brief for the U.S. Chamber of Commerce opposing the rule had this to say: “The decision today could be one of the more significant by the N.L.R.B. in the last 35 years. Depending on how the board applies its new ‘indirect test,’ it will likely ensnare an ever-widening circle of employers and bargaining relationships.” Board officials announced as part of the ruling that they would consider the indirect control inquiry on a case-by-case basis.

The 3-2 decision that was handed down on August 27, 2015 was split along party lines.  The three Democrats cited in their decision a “dramatic growth in contingent employment relationships” that “potentially undermines the core protections of the act for the employees impacted by these economic changes.”  The two dissenting republicans voiced their concern saying: “The result is a new test that confuses the definition of a joint employer and will predictably produce broad-based instability in bargaining relationships.”

In view of the NLRB decision, planning taxpayers involved in large subcontractor relationships should consider the following risk minimization techniques:  First, determine whether your subcontractor is itself functioning as a first-tier subcontractor.  For all U.S. subcontractors in your supply chain obtain verification that all workers:

  • Are subject to payroll tax withholding
  • Have medical insurance
  • Are covered by workers compensation
  • Comply with current and scheduled federal, state and local minimum wage requirements

Taxpayers should instruct their purchasing departments to establish procedures ensuring that all vendors are informed of these requirements and create appropriate verification processes.

Charles R. Goulding, Attorney/CPA, is the President of R&D Tax Saver, an interdisciplinary tax and engineering firm that specializes in R&D tax credits.

Michael Wilshere is a Tax Analyst with R&D Tax Savers.

Related Articles

No Content Available

Related Articles​

Speak With Our Tax Experts

Our Article

Our Published Article

Providing Joint Employer Tax Planning Advice

March 2024

By Charles R. Goulding and Jennifer Pariante ​

The proposed extension of the very successful Section 179D building energy tax incentive would, for the first time, cover houses of worship facilities and all other not-for-profit facilities. If enacted, the new law would be effective January 1, 2014.

The proposed extension of the very successful Section 179D building energy tax incentive would, for the first time, cover houses of worship facilities and all other not-for-profit facilities. If enacted, the new law would be effective January 1, 2014.

The current 179D legislation, which has been in effect for 8 years, has assisted tens of thousands of commercial buildings and government buildings in upgrading to today’s extremely energy efficient lighting and HVAC products. The government building incentive is provided in the form of a tax incentive for the design/retrofit team that accomplishes the qualifying energy retrofit. Worship facilities were not included in the original legislation

The Proposed EPAct Section 179D Tax Opportunity Under the proposed extension of Code Sec. 179D, design teams working on worship facilities who make qualifying energy-reducing investments would obtain immediate tax deductions of up to $3.00 per square foot. If the building project doesn’t qualify for the maximum of $3.00 per square foot immediate tax deduction, there are tax deductions of up to $1.00 per square foot for each of the three major building subsystems: Lighting, HVAC and the Building Envelope. The building envelope covers every part of the building’s exterior perimeter that touches the outside world including roof, walls, insulation, doors, windows and foundation. The tax incentive would benefit all dominations of houses of worship’s both big and small. Average U.S. House of Worship Designer Tax Benefit Illustration Open Table *Based on an average of 17,000 square feet per worship facility. Large Worship Facility Tax Incentive Illustration Open Table Worship facilities have challenging human usage patterns where it is crucial to upgrade to today’s products to greatly reduce operating costs. LED Lighting Prior generation lighting systems that operate seven days a week are extremely expensive. An LED lighting system with occupancy sensors that only turn the lights on when humans enter the worship facility can reduce lighting related energy costs to a fraction of current costs. HVAC The primary HVAC concern in Worship facilities is the maintenance of occupant comfort with a high variability in occupancy. Technologies that have the ability to lower energy use with lower occupancy are critical in saving energy. Equipment with multiple compressor stages and great part load efficiency represents the first level of increasing energy efficiency. Demand Control Ventilation which modulates air flow based on the presence of Carbon Dioxide in the air, have the ability to greatly improve energy efficiency. Lastly, an economizer using outside air instead of mechanically cooled air during the fall and spring can dramatically increase energy efficiency. Depending on location, worship facilities should layer these technologies to maximize energy savings. Conclusion The worship facility community has an opportunity to greatly reduce energy related operating costs if the proposed law is enacted. Those readers who agree that houses of worship deserve the same tax incentives as other facilities should let their congressman know how they feel.

The proposed extension of the very successful Section 179D building energy tax incentive would, for the first time, cover houses of worship facilities and all other not-for-profit facilities. If enacted, the new law would be effective January 1, 2014. The proposed extension of the very successful Section 179D building energy tax incentive would, for the first time, cover houses of worship facilities and all other not-for-profit facilities. If enacted, the new law would be effective January 1, 2014.

The proposed extension of the very successful Section 179D building energy tax incentive would, for the first time, cover houses of worship facilities and all other not-for-profit facilities. If enacted, the new law would be effective J

 

The proposed extension of the very successful Section 179D building energy tax incentive would, for the first time, cover houses of worship facilities and all other not-for-profit facilities. If enacted, the new law would be effective January 1, 2014.

The current 179D legislation, which has been in effect for 8 years, has assisted tens of thousands of commercial buildings and government buildings in upgrading to today’s extremely energy efficient lighting and HVAC products. The government building incentive is provided in the form of a tax incentive for the design/retrofit team that accomplishes the qualifying energy retrofit. Worship facilities were not included in the original legislation

The Proposed EPAct Section 179D Tax Opportunity Under the proposed extension of Code Sec. 179D, design teams working on worship facilities who make qualifying energy-reducing investments would obtain immediate tax deductions of up to $3.00 per square foot. If the building project doesn’t qualify for the maximum of $3.00 per square foot immediate tax deduction, there are tax deductions of up to $1.00 per square foot for each of the three major building subsystems: Lighting, HVAC and the Building Envelope. The building envelope covers every part of the building’s exterior perimeter that touches the outside world including roof, walls, insulation, doors, windows and foundation. The tax incentive would benefit all dominations of houses of worship’s both big and small. Average U.S. House of Worship Designer Tax Benefit Illustration Open Table *Based on an average of 17,000 square feet per worship facility. Large Worship Facility Tax Incentive Illustration Open Table Worship facilities have challenging human usage patterns where it is crucial to upgrade to today’s products to greatly reduce operating costs. LED Lighting Prior generation lighting systems that operate seven days a week are extremely expensive. An LED lighting system with occupancy sensors that only turn the lights on when humans enter the worship facility can reduce lighting related energy costs to a fraction of current costs. HVAC The primary HVAC concern in Worship facilities is the maintenance of occupant comfort with a high variability in occupancy. Technologies that have the ability to lower energy use with lower occupancy are critical in saving energy. Equipment with multiple compressor stages and great part load efficiency represents the first level of increasing energy efficiency. Demand Control Ventilation which modulates air flow based on the presence of Carbon Dioxide in the air, have the ability to greatly improve energy efficiency. Lastly, an economizer using outside air instead of mechanically cooled air during the fall and spring can dramatically increase energy efficiency. Depending on location, worship facilities should layer these technologies to maximize energy savings. Conclusion The worship facility community has an opportunity to greatly reduce energy related operating costs if the proposed law is enacted. Those readers who agree that houses of worship deserve the same tax incentives as other facilities should let their congressman know how they feel.

Table Header
Table HeaderTable HeaderTable HeaderTable HeaderTable Header
Table DataTable DataTable DataTable DataTable Data

Please click on the link to view the pdf

Published Article

Conclusion

Recent developments in robotics have enabled widespread adoption of robots in warehouses and distribution centers. These robots are intended to work alongside existing warehouse workers to handle tedious, time-consuming tasks that often deter people from seeking out these types of jobs in the first place. This warehouse and distribution center automation creates new avenues for improved productivity and efficiency. 

New Jersey distribution centers handle tremendous volumes and can benefit greatly from automation which offers opportunities to remain competitive and increase efficiencies.  These automation integrations require companies to keep up with the constant revolutionizing of e-commerce.  In addition, as consumer demand constantly changes, businesses must predict the future of the digital economy to maintain a competitive edge.

Companies engaging in the development and integration of warehouse and distribution center automation are eligible for Federal and State R&D Tax Credits to help support and stimulate these efforts.

  1. Inbound logistics. Warehouse automation: The next generation. January 27, 2016. Available at: http://www.inboundlogistics.com/cms/article/warehouse-automation-the-next-generation/
  2. Global Cold Chain Alliance. Warehouse Automation Trends. Available at: https://www.gccaonline.com/eweb/documents/Warehouse-Automation-Trends.pdf
  3. Robohub. Meet the drone that already delivers your packages, Kiva robot teardown. February 1, 2016. Available at: http://robohub.org/meet-the-drone-that-already-delivers-your-packages-kiva-robot-teardown/
  4. Business Insider. Amazon’s $775 million deal for robotics company Kiva is starting to look really smart. June 15, 2016. Available at: http://www.businessinsider.com/kiva-robots-save-money-for-amazon-2016-6
  5. Inbound logistics. Warehouse automation: The next generation. January 27, 2016. Available at: http://www.inboundlogistics.com/cms/article/warehouse-automation-the-next-generation/
Tags

Related Articles

No Content Available