OUR BLOG

Our Published Article

Adapting to European Digital Goods VAT Changes

By Charles R. Goulding and Michael Wilshere

Charles R. Goulding and Michael Wilshere discuss the European Value Added Tax on Electronic Goods.

As of January 1, 2015, there are significant changes to the European (VAT) Value-Added Tax rules.  The new rules, which were approved in 2008, will apply the tax rate on digital services such as cloud storage and movie streaming services based on consumer location.  This tax change will impact the large U.S. digital medium service providers including Netflix, Amazon, Google, Apple, and Microsoft. 

Previously, the tax rate was based on where the company selling the product had its central headquarters.  Under that system, large digital service providers benefitted from conducting central operations in tax favorable countries such as Luxembourg.  There, the tax rate was as low as 3 percent for certain purchases.  Other countries, like Britain, charge up to 20 percent for similar purchases.  Such differences in tax rates provided a tax advantage to consumers and larger enterprises that could benefit from location planning.  All that will change however with the new regulations. 

In order to comply with the rule, businesses selling digital goods will be required to:

  • Charge the VAT rate based on the consumer’s location
  • Validate the consumer’s location; and
  • Report VAT to each corresponding consumer EU country

Proponents for the new system argue that it will add up to $1 billion in annual tax revenue for the European Union.  The rule change aims to spread revenue from digital goods more evenly throughout member countries.  Nonetheless, not all countries will be affected equally. 

Some smaller countries with lower populations consume disproportionate amounts of digital services. Take France, for example, although the country has a population of 64 million which accounts for only 12 % of the larger European Union, the country generates nearly 50% of all European Union Netflix sales.  Of course, Luxembourg will be affected the most.  In order to make up for the lost revenue they will increase the value added tax on non-digital goods from 15 to 17 percent. 

Before the rule change, many large digital service providers, like Amazon and Netflix, utilized bundled pricing (including transaction taxes) in order to keep things simple for the customer.  These companies have indicated that for now this practice will continue.  The initial reaction of large service providers is to maintain bundled pricing and absorb the higher tax levels.  This however is troublesome for large service providers because the net profit margin in high VAT countries is going to be substantially reduced.  It remains to be seen how they will respond long-term.  Once these digital service providers achieve desired market penetration, some possible options could be unbundled VAT changes or raising the overall bundled price.

The new European VAT charge comes at a time when all of the major U.S. digital content providers are expanding in Europe and the rest of the world.  A billion in new revenue is attractive to government tax authorities and we expect other countries to closely follow the European experience. 

_______________________________________________________________________________________________________

Charles R. Goulding, Attorney/CPA, is the President of R&D Tax Saver, an interdisciplinary tax and engineering firm that specializes in R&D tax credits.

Michael Wilshere is a Tax Analyst at R&D Tax Savers.

Related Articles​

Our Article

Our Published Article

Adapting to European Digital Goods VAT Changes

March 2024

By Charles R. Goulding and Jennifer Pariante ​

The proposed extension of the very successful Section 179D building energy tax incentive would, for the first time, cover houses of worship facilities and all other not-for-profit facilities. If enacted, the new law would be effective January 1, 2014.

The proposed extension of the very successful Section 179D building energy tax incentive would, for the first time, cover houses of worship facilities and all other not-for-profit facilities. If enacted, the new law would be effective January 1, 2014.

The current 179D legislation, which has been in effect for 8 years, has assisted tens of thousands of commercial buildings and government buildings in upgrading to today’s extremely energy efficient lighting and HVAC products. The government building incentive is provided in the form of a tax incentive for the design/retrofit team that accomplishes the qualifying energy retrofit. Worship facilities were not included in the original legislation

The Proposed EPAct Section 179D Tax Opportunity Under the proposed extension of Code Sec. 179D, design teams working on worship facilities who make qualifying energy-reducing investments would obtain immediate tax deductions of up to $3.00 per square foot. If the building project doesn’t qualify for the maximum of $3.00 per square foot immediate tax deduction, there are tax deductions of up to $1.00 per square foot for each of the three major building subsystems: Lighting, HVAC and the Building Envelope. The building envelope covers every part of the building’s exterior perimeter that touches the outside world including roof, walls, insulation, doors, windows and foundation. The tax incentive would benefit all dominations of houses of worship’s both big and small. Average U.S. House of Worship Designer Tax Benefit Illustration Open Table *Based on an average of 17,000 square feet per worship facility. Large Worship Facility Tax Incentive Illustration Open Table Worship facilities have challenging human usage patterns where it is crucial to upgrade to today’s products to greatly reduce operating costs. LED Lighting Prior generation lighting systems that operate seven days a week are extremely expensive. An LED lighting system with occupancy sensors that only turn the lights on when humans enter the worship facility can reduce lighting related energy costs to a fraction of current costs. HVAC The primary HVAC concern in Worship facilities is the maintenance of occupant comfort with a high variability in occupancy. Technologies that have the ability to lower energy use with lower occupancy are critical in saving energy. Equipment with multiple compressor stages and great part load efficiency represents the first level of increasing energy efficiency. Demand Control Ventilation which modulates air flow based on the presence of Carbon Dioxide in the air, have the ability to greatly improve energy efficiency. Lastly, an economizer using outside air instead of mechanically cooled air during the fall and spring can dramatically increase energy efficiency. Depending on location, worship facilities should layer these technologies to maximize energy savings. Conclusion The worship facility community has an opportunity to greatly reduce energy related operating costs if the proposed law is enacted. Those readers who agree that houses of worship deserve the same tax incentives as other facilities should let their congressman know how they feel.

The proposed extension of the very successful Section 179D building energy tax incentive would, for the first time, cover houses of worship facilities and all other not-for-profit facilities. If enacted, the new law would be effective January 1, 2014. The proposed extension of the very successful Section 179D building energy tax incentive would, for the first time, cover houses of worship facilities and all other not-for-profit facilities. If enacted, the new law would be effective January 1, 2014.

The proposed extension of the very successful Section 179D building energy tax incentive would, for the first time, cover houses of worship facilities and all other not-for-profit facilities. If enacted, the new law would be effective J

 

The proposed extension of the very successful Section 179D building energy tax incentive would, for the first time, cover houses of worship facilities and all other not-for-profit facilities. If enacted, the new law would be effective January 1, 2014.

The current 179D legislation, which has been in effect for 8 years, has assisted tens of thousands of commercial buildings and government buildings in upgrading to today’s extremely energy efficient lighting and HVAC products. The government building incentive is provided in the form of a tax incentive for the design/retrofit team that accomplishes the qualifying energy retrofit. Worship facilities were not included in the original legislation

The Proposed EPAct Section 179D Tax Opportunity Under the proposed extension of Code Sec. 179D, design teams working on worship facilities who make qualifying energy-reducing investments would obtain immediate tax deductions of up to $3.00 per square foot. If the building project doesn’t qualify for the maximum of $3.00 per square foot immediate tax deduction, there are tax deductions of up to $1.00 per square foot for each of the three major building subsystems: Lighting, HVAC and the Building Envelope. The building envelope covers every part of the building’s exterior perimeter that touches the outside world including roof, walls, insulation, doors, windows and foundation. The tax incentive would benefit all dominations of houses of worship’s both big and small. Average U.S. House of Worship Designer Tax Benefit Illustration Open Table *Based on an average of 17,000 square feet per worship facility. Large Worship Facility Tax Incentive Illustration Open Table Worship facilities have challenging human usage patterns where it is crucial to upgrade to today’s products to greatly reduce operating costs. LED Lighting Prior generation lighting systems that operate seven days a week are extremely expensive. An LED lighting system with occupancy sensors that only turn the lights on when humans enter the worship facility can reduce lighting related energy costs to a fraction of current costs. HVAC The primary HVAC concern in Worship facilities is the maintenance of occupant comfort with a high variability in occupancy. Technologies that have the ability to lower energy use with lower occupancy are critical in saving energy. Equipment with multiple compressor stages and great part load efficiency represents the first level of increasing energy efficiency. Demand Control Ventilation which modulates air flow based on the presence of Carbon Dioxide in the air, have the ability to greatly improve energy efficiency. Lastly, an economizer using outside air instead of mechanically cooled air during the fall and spring can dramatically increase energy efficiency. Depending on location, worship facilities should layer these technologies to maximize energy savings. Conclusion The worship facility community has an opportunity to greatly reduce energy related operating costs if the proposed law is enacted. Those readers who agree that houses of worship deserve the same tax incentives as other facilities should let their congressman know how they feel.

Table Header
Table HeaderTable HeaderTable HeaderTable HeaderTable Header
Table DataTable DataTable DataTable DataTable Data

Please click on the link to view the pdf

Published Article

Conclusion

Recent developments in robotics have enabled widespread adoption of robots in warehouses and distribution centers. These robots are intended to work alongside existing warehouse workers to handle tedious, time-consuming tasks that often deter people from seeking out these types of jobs in the first place. This warehouse and distribution center automation creates new avenues for improved productivity and efficiency. 

New Jersey distribution centers handle tremendous volumes and can benefit greatly from automation which offers opportunities to remain competitive and increase efficiencies.  These automation integrations require companies to keep up with the constant revolutionizing of e-commerce.  In addition, as consumer demand constantly changes, businesses must predict the future of the digital economy to maintain a competitive edge.

Companies engaging in the development and integration of warehouse and distribution center automation are eligible for Federal and State R&D Tax Credits to help support and stimulate these efforts.

  1. Inbound logistics. Warehouse automation: The next generation. January 27, 2016. Available at: http://www.inboundlogistics.com/cms/article/warehouse-automation-the-next-generation/
  2. Global Cold Chain Alliance. Warehouse Automation Trends. Available at: https://www.gccaonline.com/eweb/documents/Warehouse-Automation-Trends.pdf
  3. Robohub. Meet the drone that already delivers your packages, Kiva robot teardown. February 1, 2016. Available at: http://robohub.org/meet-the-drone-that-already-delivers-your-packages-kiva-robot-teardown/
  4. Business Insider. Amazon’s $775 million deal for robotics company Kiva is starting to look really smart. June 15, 2016. Available at: http://www.businessinsider.com/kiva-robots-save-money-for-amazon-2016-6
  5. Inbound logistics. Warehouse automation: The next generation. January 27, 2016. Available at: http://www.inboundlogistics.com/cms/article/warehouse-automation-the-next-generation/
Tags

Related Articles

No Content Available