OUR BLOG

Our Published Article

STEM Education Trends and the R&D Tax Credit

By Charles R. Goulding and Adam Starsiak

Charles Goulding and Adam Starsiak of R&D Tax Savers discuss the implementation of STEM education, the skills gap, and the nation’s efforts towards increasing STEM programs.

The Great Recession has shifted growing areas our economy towards science, technology, engineering and mathematics (STEM). With this shift comes new opportunities for companies to invest in research and development activities and take advantage of the Research and Development Tax Credit.

The Research & Development Tax Credit
Enacted in 1981, the federal Research and Development (R&D) Tax Credit allows a credit of up to 13% of eligible spending for new and improved products and processes. Qualified research must meet the following four criteria:

  • New or improved products, processes, or software
  • Technological in nature
  • Elimination of uncertainty
  • Process of experimentation

The R&D Tax Credit

The Research and Experimentation Tax Credit, or the R&D Tax Credit, enacted in 1981 and part of Internal Revenue Code Section 41 – allows a credit of 13% of eligible spending for new and improved products and processes. Although the credit expired December 31, 2013 the consensus is that it will most likely either be extended or made permanent.

“The Skills Gap”

The skills gap is an employment and prosperity problem that strongly suggests that America currently struggles to fill top positions in science, technology, engineering, and mathematics. It is reported that the U.S. has over 4 million unfilled jobs due to lacking desired skill-levels in STEM-related fields – a number partly supported by the Brookings Institute’s often-cited findings from a study of aggregated lists of job openings.

The result has been a strong push towards reforming education in the 21st century; with universities, multiple levels of U.S. government and commercial businesses, and foundations pushing forward to change education.

STEM R&D Opportunities

The White House and the Department of Education have already begun initiatives to address the problem from the public end:

  • STEM Innovation Networks – $150 million for local educational agencies.
  • Effective Teaching and Learning: STEM – $150 million for funding partnerships between local educational agency and institutions of higher learning.
  • STEM Teacher Pathways – $80 million for recruiting and training 100,000 excellent STEM teachers.
  • STEM Master Teacher Corps – $35 million for the creation of a corps of leaders and educators to improve STEM education.
  • STEM Virtual Learning Network – $5 million: for creating a primarily online professional learning community.

These programs include S-STEM, which provides scholarships to students in engineering and applied sciences; STEP, which provides funding for underrepresented and income-eligible high school students for entry into STEM programs; and C-STEP, a collegiate program which provides funding to increase the number of underrepresented minorities and income eligible students pursuing degrees in STEM fields;  These programs are funded from different levels of government programs as well as commercial programs.

Amazon: Amazon delivers millions of products to people all around the world and has been expanding their warehouses throughout New Jersey for example in Middlesex County and in Burlington County. Amazon’s key operations are run on automation with more than 13,000 employees. There are 14 miles of conveyor belts which consist of a mix of employees and robots providing an efficient network to efficiently order, package and ship the order. The installation of the Amazon Prime hubs has provided customers with a faster option of receiving their orders. Amazon Prime creates a lean and cost efficient network that is difficult for competitors to supersede. Amazon has made their shipping even faster and more convenient for their customers. As the image below depicts, the Amazon facility locations spread throughout New Jersey.

STEM programs that foster diversity and access to collegiate STEM programs while providing greater access to resources and tools for education have proven successful at increasing enrollment, grade-point averages, and access to graduate programs in STEM fields. Through advancing access and increasing performance in these fields, innovation at the university and commercial level are both expected to increase, driving new products, markets, and advancements.

Over time – the increased focus on STEM education should result in an educated population that is better prepared for innovation and will make greater use of the R&D Tax Credit.

Boxed: Bulk grocery e-commerce start-up Boxed is located in Trenton, New Jersey. The warehouse introduced robots that replaced ¾ of the warehouses jobs. The “ibots” robots provide security, precision and efficiency for the company. The company retained the employees whose jobs were replaced by robots since they brought loyalty and held the company’s culture together. Boxed demonstrated that as important robots are in manufacturing people are an asset to the company. 

______________________________________________________________________________

Charles R. Goulding, Attorney/CPA, is the President of R&D Tax Saver, an interdisciplinary tax and engineering firm that specializes in R&D tax credits.

Adam Starsiak is a Tax Analyst at R&D Tax Savers.

Related Articles​

Our Article

Our Published Article

STEM Education Trends and the R&D Tax Credit

March 2024

By Charles R. Goulding and Jennifer Pariante ​

The proposed extension of the very successful Section 179D building energy tax incentive would, for the first time, cover houses of worship facilities and all other not-for-profit facilities. If enacted, the new law would be effective January 1, 2014.

The proposed extension of the very successful Section 179D building energy tax incentive would, for the first time, cover houses of worship facilities and all other not-for-profit facilities. If enacted, the new law would be effective January 1, 2014.

The current 179D legislation, which has been in effect for 8 years, has assisted tens of thousands of commercial buildings and government buildings in upgrading to today’s extremely energy efficient lighting and HVAC products. The government building incentive is provided in the form of a tax incentive for the design/retrofit team that accomplishes the qualifying energy retrofit. Worship facilities were not included in the original legislation

The Proposed EPAct Section 179D Tax Opportunity Under the proposed extension of Code Sec. 179D, design teams working on worship facilities who make qualifying energy-reducing investments would obtain immediate tax deductions of up to $3.00 per square foot. If the building project doesn’t qualify for the maximum of $3.00 per square foot immediate tax deduction, there are tax deductions of up to $1.00 per square foot for each of the three major building subsystems: Lighting, HVAC and the Building Envelope. The building envelope covers every part of the building’s exterior perimeter that touches the outside world including roof, walls, insulation, doors, windows and foundation. The tax incentive would benefit all dominations of houses of worship’s both big and small. Average U.S. House of Worship Designer Tax Benefit Illustration Open Table *Based on an average of 17,000 square feet per worship facility. Large Worship Facility Tax Incentive Illustration Open Table Worship facilities have challenging human usage patterns where it is crucial to upgrade to today’s products to greatly reduce operating costs. LED Lighting Prior generation lighting systems that operate seven days a week are extremely expensive. An LED lighting system with occupancy sensors that only turn the lights on when humans enter the worship facility can reduce lighting related energy costs to a fraction of current costs. HVAC The primary HVAC concern in Worship facilities is the maintenance of occupant comfort with a high variability in occupancy. Technologies that have the ability to lower energy use with lower occupancy are critical in saving energy. Equipment with multiple compressor stages and great part load efficiency represents the first level of increasing energy efficiency. Demand Control Ventilation which modulates air flow based on the presence of Carbon Dioxide in the air, have the ability to greatly improve energy efficiency. Lastly, an economizer using outside air instead of mechanically cooled air during the fall and spring can dramatically increase energy efficiency. Depending on location, worship facilities should layer these technologies to maximize energy savings. Conclusion The worship facility community has an opportunity to greatly reduce energy related operating costs if the proposed law is enacted. Those readers who agree that houses of worship deserve the same tax incentives as other facilities should let their congressman know how they feel.

The proposed extension of the very successful Section 179D building energy tax incentive would, for the first time, cover houses of worship facilities and all other not-for-profit facilities. If enacted, the new law would be effective January 1, 2014. The proposed extension of the very successful Section 179D building energy tax incentive would, for the first time, cover houses of worship facilities and all other not-for-profit facilities. If enacted, the new law would be effective January 1, 2014.

The proposed extension of the very successful Section 179D building energy tax incentive would, for the first time, cover houses of worship facilities and all other not-for-profit facilities. If enacted, the new law would be effective J

 

The proposed extension of the very successful Section 179D building energy tax incentive would, for the first time, cover houses of worship facilities and all other not-for-profit facilities. If enacted, the new law would be effective January 1, 2014.

The current 179D legislation, which has been in effect for 8 years, has assisted tens of thousands of commercial buildings and government buildings in upgrading to today’s extremely energy efficient lighting and HVAC products. The government building incentive is provided in the form of a tax incentive for the design/retrofit team that accomplishes the qualifying energy retrofit. Worship facilities were not included in the original legislation

The Proposed EPAct Section 179D Tax Opportunity Under the proposed extension of Code Sec. 179D, design teams working on worship facilities who make qualifying energy-reducing investments would obtain immediate tax deductions of up to $3.00 per square foot. If the building project doesn’t qualify for the maximum of $3.00 per square foot immediate tax deduction, there are tax deductions of up to $1.00 per square foot for each of the three major building subsystems: Lighting, HVAC and the Building Envelope. The building envelope covers every part of the building’s exterior perimeter that touches the outside world including roof, walls, insulation, doors, windows and foundation. The tax incentive would benefit all dominations of houses of worship’s both big and small. Average U.S. House of Worship Designer Tax Benefit Illustration Open Table *Based on an average of 17,000 square feet per worship facility. Large Worship Facility Tax Incentive Illustration Open Table Worship facilities have challenging human usage patterns where it is crucial to upgrade to today’s products to greatly reduce operating costs. LED Lighting Prior generation lighting systems that operate seven days a week are extremely expensive. An LED lighting system with occupancy sensors that only turn the lights on when humans enter the worship facility can reduce lighting related energy costs to a fraction of current costs. HVAC The primary HVAC concern in Worship facilities is the maintenance of occupant comfort with a high variability in occupancy. Technologies that have the ability to lower energy use with lower occupancy are critical in saving energy. Equipment with multiple compressor stages and great part load efficiency represents the first level of increasing energy efficiency. Demand Control Ventilation which modulates air flow based on the presence of Carbon Dioxide in the air, have the ability to greatly improve energy efficiency. Lastly, an economizer using outside air instead of mechanically cooled air during the fall and spring can dramatically increase energy efficiency. Depending on location, worship facilities should layer these technologies to maximize energy savings. Conclusion The worship facility community has an opportunity to greatly reduce energy related operating costs if the proposed law is enacted. Those readers who agree that houses of worship deserve the same tax incentives as other facilities should let their congressman know how they feel.

Table Header
Table HeaderTable HeaderTable HeaderTable HeaderTable Header
Table DataTable DataTable DataTable DataTable Data

Please click on the link to view the pdf

Published Article

Conclusion

Recent developments in robotics have enabled widespread adoption of robots in warehouses and distribution centers. These robots are intended to work alongside existing warehouse workers to handle tedious, time-consuming tasks that often deter people from seeking out these types of jobs in the first place. This warehouse and distribution center automation creates new avenues for improved productivity and efficiency. 

New Jersey distribution centers handle tremendous volumes and can benefit greatly from automation which offers opportunities to remain competitive and increase efficiencies.  These automation integrations require companies to keep up with the constant revolutionizing of e-commerce.  In addition, as consumer demand constantly changes, businesses must predict the future of the digital economy to maintain a competitive edge.

Companies engaging in the development and integration of warehouse and distribution center automation are eligible for Federal and State R&D Tax Credits to help support and stimulate these efforts.

  1. Inbound logistics. Warehouse automation: The next generation. January 27, 2016. Available at: http://www.inboundlogistics.com/cms/article/warehouse-automation-the-next-generation/
  2. Global Cold Chain Alliance. Warehouse Automation Trends. Available at: https://www.gccaonline.com/eweb/documents/Warehouse-Automation-Trends.pdf
  3. Robohub. Meet the drone that already delivers your packages, Kiva robot teardown. February 1, 2016. Available at: http://robohub.org/meet-the-drone-that-already-delivers-your-packages-kiva-robot-teardown/
  4. Business Insider. Amazon’s $775 million deal for robotics company Kiva is starting to look really smart. June 15, 2016. Available at: http://www.businessinsider.com/kiva-robots-save-money-for-amazon-2016-6
  5. Inbound logistics. Warehouse automation: The next generation. January 27, 2016. Available at: http://www.inboundlogistics.com/cms/article/warehouse-automation-the-next-generation/

Related Articles